Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Window Replacement: The Palm Beach Owner’s Guide
If you own a Therma-Tru window in Palm Beach and a sash, balance, or latch has failed, we stock and install replacement parts and full window replacements for most Therma-Tru lines. A complete Therma-Tru window replacement in Palm Beach typically runs $600 to $1,400 installed depending on size, glass package, and whether it’s an impact-rated unit. Most homeowners discover the problem the hard way: a window that suddenly won’t stay open, a sash that drops like a guillotine when you let go, or condensation that’s been quietly fogging the glass for six months. Salt air and hurricane-season humidity accelerate every failure mode here, which is exactly why we keep a deep inventory of Therma-Tru-compatible parts on the truck. Winslow Windows & Doors is an independent provider, not affiliated with Therma-Tru, but Ed Winslow’s team has installed and serviced their windows since we opened in 2011.
Which Therma-Tru Models This Applies To
Therma-Tru built its reputation on doors, but their window lines show up throughout Palm Beach homes built or renovated since the mid-2000s. The most common series we service are the hinged casement and awning windows, the double-hung sashes, and the sliding windows that made their way into newer coastal builds. Here’s the compatibility gotcha most homeowners miss: Therma-Tru window hardware is not universal across their product generations. A balance assembly from a 2008 double-hung will not fit a 2018 unit, even if both measure the same rough opening. The identifying sticker on the sash edge or inside the frame channel carries the series code and manufacturing date. If that sticker is gone, we measure the sash profile and balance channel depth to match the correct aftermarket equivalent. For most Palm Beach homeowners, a quality aftermarket balance or hinge kit from a reputable manufacturer outperforms the OEM part at roughly 60 to 70 percent of the cost. The exception is impact-rated glass: when the laminated pane itself is involved, we always recommend matching the original spec exactly, because your homeowner’s insurance and wind mitigation credits depend on it.
Signs Your Therma-Tru Window Replacement Is Failing
- Sash won’t stay open or drops when released. The balance system has lost tension or the pivot shoe has cracked. This is the number one failure we see in Palm Beach, where salt air corrodes the internal coil springs faster than inland climates.
- Window rattles or leaks air around the sash. Weatherstripping has compressed or the sash alignment is off. On older Therma-Tru units, the corner keys wear loose and the sash frame separates slightly, letting humid air through.
- Condensation between the glass panes. The insulated glass unit seal has failed. Once the desiccant inside the spacer bar is saturated, the fog never goes away, and the only real fix is glass replacement or a full sash replacement.
- Hard to crank, or the crank spins without moving the sash. The operator gear teeth are stripped or the torque bar has snapped inside the hinge. Therma-Tru casement operators take a beating in salt environments.
- Lock or latch won’t engage. The keeper is misaligned from years of the sash settling, or the locking mechanism has corroded internally. This matters beyond convenience: a window that won’t lock is a security problem and an air leak.
Replacement Cost & What’s Included
Here’s what Palm Beach homeowners should expect to pay, installed, for common Therma-Tru window replacement work:
| Service | Typical Installed Range |
|---|---|
| Sash balance replacement (per window) | $145 - $260 |
| Casement operator replacement | $180 - $320 |
| Insulated glass unit replacement (per sash) | $250 - $550 |
| Full sash replacement (custom-sized) | $400 - $800 |
| Complete window replacement (impact-rated) | $800 - $1,400 |
Those ranges reflect what we actually see in Palm Beach: older homes with non-standard rough openings run higher, while standard-size post-2010 units land on the lower end. Every quote we give is line-itemed, fixed, and includes the part, labor, disposal, and our workmanship warranty. No change orders, no surprises when the invoice comes. And if you’re a senior or veteran, that’s a permanent 10% off the total, not a promotional gimmick.
DIY or Call Us?
Here’s the honest split. You can safely diagnose a lot: check for obvious corrosion on the hinge hardware, test whether the sash sits square in the frame, look for the ID sticker we mentioned earlier. But replacing a balance assembly or a casement operator on a Therma-Tru window is where DIY projects go sideways in Palm Beach. These systems are under spring tension, the parts are model-specific, and one wrong torque can leave you with a sash that slams shut on someone’s hand. If the glass itself is impact-rated, absolutely do not attempt a DIY swap, your insurance coverage for that opening depends on the unit being installed correctly and in spec. Call (561) 782-7525 and let us handle it, the estimate is free and we’ll tell you exactly what failed before we quote anything.
FAQs
A Therma-Tru window in Palm Beach typically lasts 20 to 30 years on the frame, but the hardware and insulated glass seals usually need service between years 8 and 15. Salt air is the villain: it corrodes balances, operators, and hinges faster than any other environmental factor we see. Call (561) 782-7525 for a free inspection if your windows are in that age range.
Yes, in most cases we can repair the failed component rather than replace the whole window. Balances, operators, weatherstripping, and even the insulated glass unit can usually be swapped individually. We’ll always tell you straight if the repair cost doesn’t make sense compared to a new sash or full replacement, call (561) 782-7525 and Ed’s team will give you an honest recommendation.
Most single-window part replacements, like a balance or operator swap, are done in under an hour once we’re on site. A full window replacement or impact-glass sash typically takes one to two hours. We carry common Therma-Tru-compatible parts on our trucks, so we’re often done the same visit.
We stock the most common Therma-Tru-compatible balances, hinge kits, operators, and weatherstripping on our service trucks. For odd sizes or impact-rated glass, we measure on site and have the part fabricated quickly. We also keep stock for PGT, CGI, and CWS windows, so if your home has a mix of brands, one call to (561) 782-7525 covers all of it.
Call Winslow Windows & Doors for Therma-Tru Window Replacement in Palm Beach
Ed’s name is on the door, and on every job we do in Palm Beach. That means a live person answers when you call (561) 782-7525, the tech at your door is background-checked and in uniform, and the price we quote is the price you pay. If you’re in Palm Beach and your Therma-Tru window is failing, call us for a free estimate, and remember: $40 off any repair over $200, free second opinions on written estimates, and no trip charge when you’re in our home county. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.