Therma-Tru Window Installation Nationwide | Winslow Windows & Doors

Therma-Tru Window Installation: The Palm Beach Owner’s Guide

If you have a Therma-Tru window that needs installation in Palm Beach, you’re likely looking at $85 to $160 per window for a standard in-frame replacement, and $240 to $400 per opening if the window needs a full tear-out and new construction install. We carry Therma-Tru window hardware, weatherstripping, and installation components on our trucks, and we can usually have yours done within a day or two of the estimate. Most Palm Beach homeowners don’t discover their window installation has failed until they notice water staining below the sill after a hard rain, or hear wind whistling through the frame on a breezy afternoon.

Call (561) 782-7525

Which Therma-Tru Models This Applies To

Therma-Tru’s window line is built around their entry door systems, so if your window is paired with a Therma-Tru door, you’re likely working with their Classic-Craft, Pulse, or Benchmark series windows. The gotcha most Palm Beach owners hit: Therma-Tru windows made before 2015 use a different weatherstrip profile than current models, and the old profiles aren’t available from the factory anymore. That means you either need a compatibility retrofit or a full replacement of the weatherstripping system, which is exactly why we keep both the legacy and current profiles stocked locally.

When we match a part, we look at the AAMA certification label on the window frame first. That label tells us the exact series, the glass package, and the manufacturing date. From there, we can tell you quickly whether an OEM Therma-Tru part is the right call or whether a quality aftermarket equivalent will perform just as well for less money. In our experience, aftermarket weatherstripping and window balances from WTS Paradigm and similar suppliers match Therma-Tru specs reliably. But the sash locks and tilt latches? Go OEM. The aftermarket versions wear faster in Palm Beach humidity and salt air.

Signs Your Therma-Tru Window Installation Is Failing

• Condensation between the panes along the bottom edge. This means the low-E coating has failed or the seal is compromised. In Palm Beach’s humidity, the pressure difference across the glass causes seal failure to show up at the bottom first, especially on east-facing windows that get the morning sun.
• Wind whistle or a steady draft near the sides of the sash. That’s almost always a compressed or torn weatherstrip. The original Therma-Tru wool-pile weatherstrip crushes flat after about 7 to 9 years of daily closing cycles, and once it flattens, the window leaks air even when locked shut.
• The sash won’t stay up on its own. A spring balance failure usually happens gradually, then one day the window drops hard when you let go. The good news is that we can often replace just the spring cartridge rather than the whole sash. The bad news is that a dropped sash can break or damage the track if you keep fighting it.
• Water staining below the window or soft drywall around the sill. That isn’t always a window glass problem. On Therma-Tru windows installed without a proper sill pan or with nail fins that weren’t sealed correctly, the leak is often in the installation itself. We see this more often with windows installed by production crews than by dedicated window installers in Palm Beach.
• The window sticks mid-track, but only on one side. That’s a balance spring that’s lost tension on one side only. It’s a quick fix if we catch it early, but if it’s left too long, the unbalanced load will bow the aluminum track slightly and the window will never run smooth again without a full replacement.

Replacement Cost & What’s Included

For a standard Therma-Tru window re-installation in Palm Beach, expect to pay $85 to $160 per window for a straightforward in-frame job. That includes removing the old window, replacing any failed installation components, re-installing with fresh sealant and insulation, and cleaning up when we leave. If the window is failing because the original installation was done wrong, the price goes up to $240 to $400 per window for a full frame replacement, because we’re pulling the casing, addressing the rough opening, and re-flashing the entire assembly before the new window goes in.

What drives the range? The answer is condition and access. A first-floor double-hung with a clean opening moves fast. A second-floor window with a rotted sill plate and a stubborn stucco cut takes longer. We’re certified installers, so we don’t install improperly, and our installation warranty covers the work for as long as the Done Right Promise stands. If it’s not right, we come back. That’s how Ed Winslow has run things since 2011.

DIY or Call Us?

Let me be honest with you. A Therma-Tru window replacement isn’t a typical DIY project, especially not in Palm Beach, where the building code requires impact-resistant glazing and the heat does strange things to improperly sealed frames. You can safely check the weatherstripping yourself by pulling the sash out and looking for flattening, and you can spot a broken spring balance by testing the weight of the sash when you lift it. But the actual replacement? That usually means removing the old sash from the frame without breaking the glass, which is easier said than done on a window that’s been baking in the Florida sun for ten years.

And if you’re dealing with water intrusion, a DIY fix is not going to solve it unless you also address the rough opening, the flashing, and the sill pan. That’s the part most homeowners get wrong, and it’s the part that turns a $150 job into a $3,000 water damage claim down the road. Save yourself the headache and call us at (561) 782-7525, and we’ll give you an honest assessment before any work gets scheduled.

FAQs