Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterMr-Glass Windows & Doors in South Palm Beach, FL | Winslow Windows & Doors
We provide independent Mr-Glass window and door service throughout South Palm Beach, FL. What makes our Mr-Glass work different here comes down to one thing: this town sits on a narrow barrier island with salt air hitting your frames from the ocean *and* the Intracoastal at the same time. If you own a Mr-Glass window or door in South Palm Beach, give us a call at (561) 782-7525 and we’ll come take a look.
Why South Palm Beach Residents Choose Us for Mr-Glass Service
Ed Winslow has been working on Mr-Glass products in Palm Beach County for over 20 years, long before Winslow Windows & Doors officially opened its doors for Window Installation in South Palm Beach in 2011. He grew up in El Cid, just across the bridge, and spent enough summers watching salt air chew through aluminum to know exactly what happens to a window frame when it gets hit from two sides. That experience means our crew does not have to guess when we open up a Mr-Glass slider in one of the oceanfront towers along State Road A1A. We have already seen it fail, we know why, and we bring the right parts the first trip.
We are an independent Mr-Glass service provider. Winslow Windows & Doors is not manufacturer-affiliated or authorized by Mr-Glass. That independence cuts both ways and it cuts in your favor: we recommend the repair or replacement that actually makes sense for your unit, not the one a manufacturer would prefer. If a genuine Mr-Glass part is what the job needs, that is what we use. If a marine-grade stainless aftermarket part will outlast the OEM option in South Palm Beach’s salt air, we will tell you that plainly.
Common Mr-Glass Windows & Doors Problems We Solve in South Palm Beach
- Frozen or seized slider rollers. Mr-Glass horizontal sliders use nylon roller wheels on stainless tracks, and in South Palm Beach those rollers get packed with wind-blown sand and salt residue. Within a few years on an oceanfront unit, panels that should glide with one hand become nearly impossible to move. We replace rollers and clean tracks, and under no circumstances do we just spray lubricant and call it done. Lubricant on a salt-packed track makes it worse.
- White powder corrosion on Mr-Glass 6200 Series frames. The 6200 Series non-impact aluminum slider is still common in older condos here, and bare aluminum does not stand a chance against this environment. We see pitting and powdery white corrosion concentrated right where the frame meets the concrete sill, because that joint holds salt moisture for hours after every storm. Once pitting gets deep, patching is a waste of money and we will recommend replacement.
- Leaking interlocking meeting rails. On Mr-Glass single hung windows, the two sashes lock together at a meeting rail. After years of salt exposure and storm-driven wind, that seal degrades and lets water and salt mist push through into the unit during squalls. Replacing the meeting rail seal with a factory-matched part restores the weather tightness without pulling the whole window.
- Non-compliant single-pane glass. Many original Mr-Glass windows in South Palm Beach’s 1960s to 1980s condo towers still carry single-pane glass that does not meet current Florida Product Approval impact requirements. When a building goes through retrofit or a unit changes hands, those windows often have to come out. We handle those replacements with the full paperwork package the condo board demands.
- Fogged insulated glass units. Dual-pane Mr-Glass units that lose their seal will fog from the inside, and in a salt environment that fog leaves mineral deposits on the interior glass surface that cannot be wiped away. The fix is a new insulated glass unit, not a cleaning.
Mr-Glass Service in South Palm Beach: What Local Conditions Mean for Your Equipment
Here is what nobody tells you until you live here for a few years: nearly every Mr-Glass replacement in South Palm Beach happens on the oceanfront side of State Road A1A, where the condo architectural review board wants technical drawings, Florida Product Approval numbers, and a physical color sample submitted before a single old frame gets pulled. That paperwork has to specify marine-grade finishes, or the board rejects it outright. If your contractor shows up without that package prepared, you lose weeks in committee review. We have run this HOA-first workflow on unit-by-unit retrofits and full-building re-glazing jobs along this stretch, including buildings near Boynton Beach Boulevard and down toward Willoughby Road, so our paperwork starts moving before our truck shows up. In an all-condo town, the paperwork is half the job.
Mr-Glass Models & Products We Service in South Palm Beach
Our crew regularly works on the Mr-Glass 7600 Series horizontal slider, the 7200 Series single hung, the 7800 Series casement, and the older 6200 Series non-impact aluminum slider that is still hanging on in many original units. For structural parts like meeting rail seals, roller assemblies, and locking hardware, we source genuine Mr-Glass components so the replacement matches what the unit left the factory with. When an OEM part is discontinued or simply not built to survive South Palm Beach’s dual-salt exposure, we recommend marine-grade stainless or powder-coated aftermarket alternatives and explain exactly why. We keep the most common roller sets and seal profiles stocked locally, which shortens turnaround for the bulk of what we fix here. To learn more about our full brand coverage, see our Mr-Glass sales & service page.
Mr-Glass Service Pricing in South Palm Beach
What you pay depends on what is actually wrong, and we are not going to give you a comfortable number over the phone and then “discover” more once we are on site. A roller replacement on a Mr-Glass slider typically runs less than half the cost of a full frame replacement, and a meeting rail seal swap is less than either. Replacing a single Mr-Glass insulated glass unit in an oceanfront tower runs more than a glass swap inland because the access and the disposal and the HOA paperwork all add steps. For an exact number on your unit, call (561) 782-7525 and we will come out and give you a written line-item quote. Estimates are free.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mr-Glass Windows & Doors in South Palm Beach
Yes, in nearly every building here you do. South Palm Beach is almost entirely condo towers, and the architectural review board typically requires product specs, Florida Product Approval numbers, and a color sample before you can pull an old frame. We prepare that paperwork as part of the estimate, so you are not stuck navigating committee review alone. Call (561) 782-7525 and we will walk you through what your specific building requires.
Usually not. The 6200 Series frames are non-impact aluminum with channels that were never designed to carry the weight and thickness of impact-rated laminated glass. In a salt environment like South Palm Beach, forcing an impact pack into a frame that is already pitting and corroded creates a poor seal and a false sense of protection. We will assess the frame condition honestly; in most cases, a full frame replacement with our Impact Windows in South Palm Beach is the right call.
Two words: salt and sand. South Palm Beach has ocean on one side and the Intracoastal on the other, so the air carries fine salt particles and beach sand into every track. Nylon rollers and stainless tracks get packed with that grit, and the salt accelerates corrosion on any steel component inside the assembly. This is not a manufacturing defect; it is the environment doing what it does. We replace rollers with marine-grade components when available and recommend a cleaning schedule that makes sense for your building’s exposure.
Impact-rated laminated glass is heavier than single pane, no question. But a properly installed and maintained Mr-Glass impact slider should still open with moderate effort because the rollers and track are doing the work. If an impact slider is hard to move, it is almost always a roller or track problem, not a weight problem. We have replaced frozen rollers in units where the owner assumed the window was just too heavy, and after the fix they opened it with one hand. Call (561) 782-7525 and we will check yours.
Yes, and we do it regularly. Condo boards in South Palm Beach are strict about finish consistency across a building. We submit the color sample with the architectural package and coordinate with the board to make sure the replaced units match the originals. This is one of the reasons we have been trusted with unit-by-unit retrofits instead of full-building teardowns; the buildings know the finish will match.
Service Areas Near South Palm Beach
We serve South Palm Beach and the surrounding coastal and mainland communities. If you are in Mr-Glass service in Palm Beach, Mr-Glass service in West Palm Beach, Boynton Beach, Riviera Beach, or Royal Palm Beach, our full Mr-Glass service area is covered by the same crew and the same live phone. See our South Palm Beach service area page for the details on where we work and what we handle in each community.
Book Your Mr-Glass Service in South Palm Beach Today
Our crew once pulled a corroded Mr-Glass 7600 Series slider from a seventh-floor unit near R C Kreusler Park. The bottom track was pitted deep and the rollers were frozen solid, so the owner had not opened that window in months. We replaced it with a new impact-rated Mr-Glass slider with stainless steel hardware and matched the bronze finish the condo board required. One afternoon, job done, ocean view intact. That is what we do here. Call (561) 782-7525 for your free estimate, and remember: my name’s on the truck. That’s the only guarantee you actually need.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving South Palm Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.