Mr-Glass Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

Mr-Glass Shingle, Tile & Metal Roofing in Palm Beach: What to Know First

Mr-Glass shingle, tile, and metal roofing repair in Palm Beach typically runs $350 to $1,800 depending on the material and the extent of the damage, and most jobs are completed within one to three days of the initial visit. We’re an independent Mr-Glass service provider, meaning we fix what’s broken without any obligation to the manufacturer’s warranty department. If you own a Mr-Glass roof in Palm Beach and something doesn’t look right, call (561) 782-7525 and a live person answers, day or night.

Call (561) 782-7525

This page is for homeowners who’ve noticed a leak, a lifted tile, a rust spot on a metal panel, or shingle granules piling up in the gutter. You want to know what’s wrong, what it costs, and whether it can wait. We’ll give you straight answers.

How Mr-Glass Products Fail - and How We Fix Them

• Tile underlayment rot on Mr-Glass barrel tile systems. The tile itself rarely fails first. In Palm Beach, the underlayment beneath Mr-Glass barrel and flat tile profiles degrades from trapped humidity and salt exposure long before the tile shows visible damage. Symptom: water stains on the ceiling with no cracked tile above. We lift the tile, replace the underlayment section, and reset the tile with the manufacturer’s fastening pattern.
• Metal panel seam separation on Mr-Glass standing seam roofs. The thermal expansion and contraction of coastal Palm Beach heat cycles pulls Mr-Glass standing seam panels apart at the lap joints, especially on south-facing roof planes. You’ll see hairline gaps where panels overlap. We re-seat the seams and re-apply the sealant, and if the panel has stretched, we replace the section rather than caulking over a structural problem.
• Shingle granule loss on Mr-Glass asphalt shingle lines within the first decade. Mr-Glass shingles installed after major storms in Palm Beach sometimes show premature granule shedding, particularly where the roof catches direct afternoon sun off the Intracoastal. Symptom: bare patches on the shingle face with visible fiberglass mat. We inspect the entire slope, and if granule loss hits a threshold, we replace the affected planes rather than patching shingle by shingle.
• Tile valley flashing failure. Mr-Glass tile roofs in Palm Beach frequently leak at the valleys where two roof planes meet. The original flashing corrodes or lifts under wind-driven rain, and water sneaks underneath the tile course. We pull the valley tiles, replace the flashing with a heavier gauge, and re-bed the tiles. This is one of the few repairs where the fix is more durable than the original install.
• Metal roof fastener back-out. Mr-Glass metal panels occasionally back out their original fasteners after repeated hurricane-season pressure cycles, especially on roof edges where uplift is strongest. You’ll spot raised screw heads or slight panel fluttering in wind. We replace the fasteners with a longer, wider thread and check the entire perimeter for other loose points before it becomes a leak.

Our Mr-Glass Shingle, Tile & Metal Roofing Process

1. 1
   Call and talk to a person. You reach (561) 782-7525. We ask what you’re seeing, when it started, and whether there’s active water intrusion. If it’s an emergency, we walk you through a temporary measure while we schedule the visit.
2. 2
   On-site inspection. One of our background-checked techs arrives in uniform, walks the roof, photographs everything, and shows you the damage before touching anything.
3. 3
   Parts decision. We check whether OEM Mr-Glass components are still available and whether they’re worth the wait. For most shingle, tile, and metal repairs, a quality aftermarket part performs identically without the six-week lead time. We give you both options with prices.
4. 4
   The repair. We follow the roof system’s installation method, whether that means re-bedding tile, re-seating metal seams, or replacing shingle courses. No shortcuts, no mystery materials.
5. 5
   Water test and walkthrough. We run water over the repair area if conditions allow, then show you the finished work and explain what to watch for in the next big rain.
6. 6
   The guarantee. Our work carries the Done Right Promise. If it’s not done right, we make it right. That’s Ed Winslow’s name on the work, not a ticket number.

What Mr-Glass Shingle, Tile & Metal Roofing Costs in Palm Beach

• Shingle repair (single leak, small area): $350-$850
• Tile re-bedding (up to 10 tiles with underlayment patch): $600-$1,400
• Metal seam re-seal and fastener replacement: $450-$1,100
• Valley flashing replacement (up to 12 linear feet): $800-$1,800
• Full roof section replacement: quoted per square foot, material and slope dependent

What moves the price: roof pitch (anything over 6/12 requires safety rigging), tile profile availability, how many layers are already on the roof, and whether the decking underneath is sound. We don’t pad estimates and we don’t change the number once we start. Call (561) 782-7525 for an exact quote. Estimates are free, and if you have a written bid from another contractor, bring it in for a free second opinion.

Why Palm Beach Homeowners Call Winslow Windows & Doors for Mr-Glass Work

Because the person who answers the phone is the same company that shows up. We’ve been doing this in Palm Beach since 2011, and Ed Winslow’s name is on the truck, the invoice, and the warranty. Our techs know Mr-Glass failure patterns because we’ve seen them on hundreds of Palm Beach roofs, from the older barrel tile profiles to the newer metal panel systems. And if a repair ever crosses into replacement territory, we install from a short list of brands we trust: PGT, CGI, CWS, and ES Windows alongside Mr-Glass. No national chain’s rotating crew, no subcontractor roulette. Upfront pricing, background-checked techs, and a guarantee with a century behind it.

FAQs