Mr-Glass Custom & Geometric Windows Nationwide | Winslow Windows & Doors

Mr-Glass Custom & Geometric Windows in Palm Beach: What to Know First

We’re an independent Mr-Glass service provider in Palm Beach, and we repair, replace, and install custom and geometric windows from the Mr-Glass line every week. Most Mr-Glass custom window jobs in Palm Beach take us one to three days once parts are in hand, and you’ll know the full price before we order a single piece of glass. Call (561) 782-7525 for a free estimate.

Call (561) 782-7525

This page is for homeowners in Palm Beach who own Mr-Glass windows, especially the shaped and oversized units, and need a company that knows this brand’s quirks without having to explain them to five different contractors first. If you’ve got a curved transom that’s fogging, an arched picture window that won’t seal, or a geometric panel that’s cracked, you’re in the right place.

How Mr-Glass Products Fail, and How We Fix Them

Mr-Glass builds a solid product, but every window line has its patterns. Here’s what we see on custom and geometric units in Palm Beach, and what we do about it:

• Seal failure on shaped insulated glass units. The Mr-Glass Series 9500 fixed and picture windows with curved or angled glass develop fogging between panes faster than rectangular units, and the humidity in Palm Beach speeds that up. The radius bends in the spacer bar create stress points where the seal eventually lets go. We replace the IGU with a fresh unit built to the exact template, not a close-enough rectangle.
• Frame racking on oversized geometric openings. Mr-Glass’s larger trapezoid and parallelogram units (the ones homeowners install to make a statement wall) put serious weight on the frame corners. In older Palm Beach homes with wood framing, we see the frame shift a few millimeters as the house settles. Symptoms are a window that suddenly sticks or a visible gap at one corner. We re-shim, re-square, and reseal, and we’ll tell you honestly if the opening needs a reinforcement reframe before the glass goes back in.
• Hardware stress on operable shapes. Mr-Glass awning and casement windows with non-rectangular sashes wear out their crank mechanisms unevenly. The Series 3000 casement in a parallelogram shape is a common one. When the sash is heavier on one side, the operator arm binds and strips. We stock the replacement operators that match Mr-Glass hardware, and we’ll swap them without forcing you to replace a perfectly good sash.
• Impact glass delamination on coastal exposures. Mr-Glass impact-rated laminated units hold up well, but any laminated glass exposed to constant salt spray and direct sun (think east-facing geometric windows a block from the Intracoastal) can start to show edge clouding after ten-plus years. That’s the interlayer breaking down, not a cleaning issue. We’ve pulled enough of these to spot it in the first minute. Replacement is the fix, and we’ll match the original impact rating.
• Weep system clogs on custom radius units. Mr-Glass’s curved-bottom windows rely on small weep holes to drain condensation, and in Palm Beach those holes collect pollen, salt crust, and the occasional love bug. Water backs up, then finds its way into the track or the wall. We clear the weeps, check the slope, and replace the glazing beads if they’ve swelled.

Our Mr-Glass Custom & Geometric Windows Process

Here’s what a Mr-Glass job with us looks like from first call to final walkthrough:

1. 1
   You call, a person answers. 24/7, no voicemail loop. We’ll ask what you’re seeing, get the rough window dimensions, and set a time to come out. No trip charge inside the county.
2. 2
   We diagnose on site. A background-checked technician measures the exact glass dimensions with a template if needed, inspects the frame, and identifies whether it’s a seal, hardware, or structural issue. You get a written line-item estimate before we do anything else.
3. 3
   Parts decision. For Mr-Glass units, we order OEM glass and hardware where it matters for warranty and fit, and we’ll tell you when a quality aftermarket part is just as good and costs less. You decide with real numbers in front of you.
4. 4
   The repair or replacement. We remove the old unit, prep the opening, install the new glass with fresh glazing and sealant, and re-square the frame if needed. For geometric windows, we dry-fit before the final seal.
5. 5
   Test and verify. We run a water test on exterior joints and check the operation on any moving sash.
6. 6
   Cleanup and the guarantee. We take the old glass and debris with us. Every job is covered by our Done Right Promise: if it’s not done right, we come back and make it right. Ed’s name is on the door, and on every job we do.

What Mr-Glass Custom & Geometric Windows Costs in Palm Beach

Straight numbers, because that’s how we quote:

• Reseal or re-caulk a fixed geometric unit: $180-$350
• Replace a fogged IGU in a shaped window: $400-$900, depending on size and curvature
• Replace a cracked Mr-Glass impact panel (custom shape): $800-$2,200, depending on square footage and impact rating
• Replace hardware on a shaped operable window: $150-$400
• Full frame replacement for an oversized geometric unit: $2,500-$6,000, with the opening condition dictating the spread

What moves the price: how much custom templating the glass needs, whether the frame is salvageable, and whether the opening requires reinforcement. Palm Beach’s wind zone requirements also affect impact-rated replacement costs. Every estimate is free, and the number we quote is the number you pay. Call (561) 782-7525 for an exact quote.

Why Palm Beach Homeowners Call Winslow Windows & Doors for Mr-Glass Work

We’ve been fixing and installing windows in South Florida since 2011, and Ed Winslow runs this company the way he’d want someone to run it if they were working on his own home in El Cid. That means a live person answers the phone at 2 a.m., the technician who shows up is background-checked and in uniform, and the price on the estimate is the price on the invoice. Most homeowners in Palm Beach don’t find a window problem at a convenient hour, and we built the whole company around that reality.

We’re authorized installers for eight premium brands, so if your Mr-Glass unit is beyond saving, we can show you comparable options from PGT, CGI, CWS, and ES Windows side by side, with real pricing on each, no sales pressure, just the facts. A lot of companies talk about standing behind their work. Our standard is a 100-year promise with Ed Winslow’s name behind it. My name’s on the truck. That’s the only guarantee you actually need.

FAQs