ES Windows Window Replacement Nationwide | Winslow Windows & Doors

ES Windows Window Replacement: The Palm Beach Owner’s Guide

If you own ES Windows and one has failed, here’s the straight answer: we stock ES Windows-compatible replacement parts and full window replacements in Palm Beach, with most installed jobs running $900 to $2,800 per window depending on size, glass package, and frame condition. Most ES Windows replacements we handle are completed same day once the part or unit arrives. You’ll typically know you need us when the sash won’t seal, the crank spins without moving the window, or water shows up on the interior sill after a hard Palm Beach downpour.

Call (561) 782-7525

ES Windows builds a good product. But salt air, hurricane cycles, and a decade of UV exposure do not care about brand reputation. We’ve replaced enough ES Windows sashes, balances, and full frames in Palm Beach to know exactly where they fail first. The good news is that the parts are generally available, and the repair does not have to mean replacing every window in the house.

Which ES Windows Models This Applies To

ES Windows manufactures several series, and the right replacement part depends on which line is in your home. The most common ES Windows series we work on in Palm Beach are impact-rated casement and horizontal roller models, along with fixed picture windows. The compatibility gotcha most owners miss: ES Windows impact-rated units built before roughly 2015 used a narrower frame profile than the current production runs, so a new sash from today’s catalog will not always drop into an older frame. You need someone who has both generations in hand to match the hardware correctly.

To identify what you’ve got, look for a sticker on the upper edge of the sash or the jamb. It will usually list the series code, the impact rating, and the date of manufacture. If the label is faded, you can measure the visible glass width and the frame depth. For ES Windows specifically, frame depth is the tell: pre-2015 fixed units typically measure around 2 3/4 inches deep, while newer ones run closer to 3 1/4. We keep OEM ES Windows hardware on our trucks and use it by default. Aftermarket equivalents are available for some balance and hinge components, but for glass packs and sashes, we recommend staying with OEM. ES Windows uses a proprietary laminate in its impact glass and a third-party pane rarely matches the original performance spec.

We’re an independent Palm Beach window company. We install and service ES Windows, but we’re not affiliated with the manufacturer. That works in your favor: no corporate voicemail tree, no dealer territory lines. Just a local crew that knows the product.

Signs Your ES Windows Window Replacement Is Failing

• Condensation between the panes. This means the seal on the insulated glass unit has failed. The argon or krypton gas has escaped and moist Florida air has crept in. In Palm Beach, we see this on south and west-facing windows first, since the constant heat cycling is hardest on the laminate bond. There is no cleaning fix for this; the glass pack gets replaced.
• Crank turns but the sash doesn’t move. The gear mechanism inside an ES casement operator wears down over time. Salt in the coastal air accelerates it. Sometimes it’s stripped splines, sometimes a broken worm gear. Either way, the window is stuck half-open, which is not acceptable during hurricane season.
• Water on the interior sill after rain. This is usually a failed weatherstrip or a warped sash, not a roof leak. In older Palm Beach high-rises and single-family homes near the water, we see this after 8 to 12 years on non-impact ES Windows. Left alone, the water gets into the framing and you’re no longer looking at a window replacement; you’re looking at wall repair too.
• The window is noticeably harder to open or close. That’s the balance system wearing out, or the sash has settled out of square because the framing has shifted. Older Palm Beach concrete-block homes move with the heat. A window that fights you every time you touch it is telling you a component is done.
• Visible cracks in the frame or laminated glass delamination. ES Windows impact glass is a multilayer sandwich. When the layers start to separate, the glass looks hazy at the edges or you’ll see a pearlescent pattern. That’s not cosmetic. The window has lost its structural integrity and will not perform in a storm.

Replacement Cost & What’s Included

In Palm Beach, an ES Windows replacement job lands in these ranges:

Those numbers include the part, labor, removal, re-installation, and proper disposal of the old glass. The range exists because a 36-inch casement in a first-floor bungalow and a 60-inch fixed unit in a second-floor Intracoastal condo involve different amounts of access, ladder work, and framing repair. We write the quote so you see the part cost and labor cost separately. No hidden line items. The job is not priced until we’ve looked at the window in person, which is why we don’t give phone numbers that don’t hold up. Our workmanship on ES Windows replacements is backed by the Done Right Promise: if it’s not done right, we make it right. Ed’s name is on the door, and on every job we do.

DIY or Call Us?

What an owner can safely check themselves: read that label on the sash edge to confirm the series, take a couple photos of the hardware, and look for obvious cracks or separation. That helps us get ready before we arrive. What we’d stop you from doing yourself: balancing springs and heavy impact glass sashes, because both can hurt you or cause thousands in damage if released wrong. When an ES Windows casement sash comes out, the frame carries surprising tension if a balance or hinge is bound up. And a failed impact window is not something to leave off the frame for a weekend while you watch a YouTube video.

Call (561) 782-7525. We will show up, look at the window in person, and give you a written line-item price. If it’s something we can fix with a part we carry on the truck, we’ll do it right then.

FAQs