Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Energy-Efficient Windows in Palm Beach: What to Know First
We repair, tune, and replace ES Windows energy-efficient windows in Palm Beach, and most jobs are completed in a single visit once parts are in hand. Honest posture: some ES Windows failures are quick fixes under $300, while others mean the sash has reached the end of its life and replacement is the smarter money. If you own ES Windows and your electric bill has climbed or condensation is forming between the panes, call Winslow Windows & Doors at (561) 782-7525. Ed Winslow has worked on these units long enough to know exactly what fails in Palm Beach’s salt air and humidity, and what’s worth fixing versus replacing.
Key Takeaways:
- We’re an independent ES Windows service provider, not a manufacturer warranty arm. That means we tell you the truth about repair-versus-replace without a sales quota behind it.
- Most ES Windows energy-efficiency complaints in Palm Beach trace to seal failure, worn weatherstripping, or glass coating degradation from UV exposure and salt air.
- Free estimates. Published address and license number. Ed’s Done Right Promise backs every job we touch.
How ES Windows Products Fail - and How We Fix Them
ES Windows and doors are known for thin, elegant frame profiles that maximize glass area and preserve sightlines, especially in mid-century and modern Palm Beach homes. That design is the strength. It’s also the weak point when it comes to energy efficiency in our climate. Here’s what we see on service calls from West Palm to El Cid to the condos along South Ocean Boulevard:
- Insulated glass seal failure on older ES units. The desiccant inside the spacer eventually saturates in Palm Beach’s humidity, then the seal lets go. You’ll see fog or haze inside the glass that won’t wipe off. We replace the insulated glass unit (IGU) with a new one built to a Low-E spec that makes sense for a south-facing exposure. The fog isn’t just cosmetic. A failed seal means that cavity is no longer insulating, and your AC is paying for it.
- Frame expansion and gasket compression from salt air and sun. Hurricanes bring the headlines, but day after day of UV exposure quietly dries out ES window gaskets and weatherstripping. You’ll feel a warm draft around the sash in summer. We match OE-grade replacement seals and gaskets rather than stuffing generic foam into the channel, which is what makes the difference between a fix that lasts and one that reappears next August.
- Low-E coating degradation on older ES glass. When a Low-E coating starts to break down, the window stops reflecting radiant heat the way it should, and rooms facing the sun get noticeably warmer. You might also see a faint cloudiness or a subtle rainbow sheen across the glass surface. There’s no repair for degraded coating. Our recommendation is usually a new IGU with a modern low-E spec matched to the window’s orientation. We’ll tell you straight if the frame is still solid and the glass is the only thing that needs to go.
- Roller and track wear that leaves daylight gaps. Older ES windows can settle or wear enough that the sash no longer closes true against the weatherstripping. You’ll see light through the edge of the sash, and that’s unconditioned outside air finding its way in. Replacing rollers and adjusting the track realigns the sash and restores the seal. It’s a relatively small repair that makes a real difference on a bedroom that won’t hold a comfortable temperature.
- Condensation between panes in ES windows near the ocean. Condensation on the inside of the glass might just be a humidity problem inside the house. Condensation between the panes is always a failed IGU. In Palm Beach, we see this most often in condo units along the Intracoastal where the glass takes salt spray and the building’s DEA stack effect pulls moisture into the wall cavity. The fix is IGU replacement, but we’ll first make sure the wall assembly and stucco around the window aren’t also letting water in. No point putting new glass into a frame that’s leaking through the flange.
Our ES Windows Energy-Efficient Windows Process
Every ES Windows job we do in Palm Beach follows the same sequence, from the first phone call to the final walkthrough:
- 1
Call and schedule. A live person answers at (561) 782-7525, any hour. No voicemail loop. We get your address, your window’s symptoms, and a history if you know it (age, which rooms are hot, whether you’ve had prior seal failures).
- 2
On-site diagnostic. A uniformed, background-checked technician shows up and does a room-by-room look at your ES Windows. We check glass surface temperature with an infrared thermometer, inspect the condition of the IGUs and gaskets, and identify exactly where the energy leak is. This is not a pitch. It’s a diagnosis.
- 3
Parts decision: OEM versus quality aftermarket. For ES Windows, the original factory hardware is the best choice when it’s available and the window is still under warranty. When OEM glass is discontinued or the warranty has expired, we source a high-quality IGU from a commercial glass fabricator that builds to ES’s original specs and can include Low-E coating, argon fill, and laminated glass for impact zones. We’ll show you the price and lead time for both options, and we’ll tell you which one makes sense for your home. We never install cut-rate glass that fails in three years.
- 4
The repair or replacement. We do the work with the window in place where possible, which keeps dust down and lets you stay in the house. For IGU swaps, we pull the stop, set the new unit with new tape, and restore the gaskets. For full frame replacements, we follow manufacturer installation guidelines to the letter and back it with our own Done Right Promise.
- 5
Test and verify. We run the window through its full range of movement, check for daylight gaps with a flashlight, and take a post-repair temperature reading where it matters. When we leave, you’ll know what we fixed, what it cost, and why it should stay fixed.
- 6
Warranty and follow-up. Every job carries the Done Right Promise. If something’s not right, Ed makes it right. That’s the long and short of it.
What ES Windows Energy-Efficient Windows Costs in Palm Beach
Repair pricing, not optimistic pricing. Here are the ranges we quote on ES Windows work in Palm Beach:
- Weatherstripping or gasket replacement per window: $180-$340 installed, depending on window size and how much of the original gasket material has dried out.
- Roller and track realignment: $220-$380 per window, including new rollers and track adjustment. Solving a daylight gap is usually the cheapest meaningful energy win on an older window.
- Insulated glass unit (IGU) replacement with Low-E and argon fill: $550-$1,100 per sash, depending on glass size, coating spec, and whether the window is in an impact zone requiring laminated glass. This is the most common energy-efficiency repair on ES units with failed seals.
- Full ES window replacement (new frame, sash, and glass): $1,800-$4,500 per window, driven by size, impact-rating requirements, and the series you choose. We’ll tell you when the frame is still solid and glass-only replacement is the smarter spend.
What moves the price: whether the glass faces the ocean (laminated and impact-rated costs more), whether you want a higher-performance Low-E coating, how much of the existing frame can be saved, and whether we’re removing old caulk and bedding that’s been painted over 40 years. You get a line-item written quote before any work starts, and that number does not change once we begin. Call (561) 782-7525 for a free estimate on your ES Windows.
Why Palm Beach Homeowners Call Winslow Windows & Doors for ES Windows Work
Plenty of window companies in Florida will sell you new ES Windows. Not many will show up on a Tuesday morning to fix the two that have lost their seal and tell you honestly that the other six are fine. That’s where we come in. We’ve been doing this in Palm Beach County since 2011, and our phone has been answered by a live person every day since. We know ES Windows frames, seals, rollers, and glass specs well enough to diagnose the problem and fix it right the first time. And when an ES Windows product isn’t the right fit anymore, we can put in PGT, CGI, CWS, or ECO Window Systems units instead, because we’re authorized installers for those brands too. You get a straight answer, not a brand loyalty pitch. Ed’s name is on the truck. That’s the only guarantee you actually need.
FAQs
If the fog is between the glass panes, the insulated glass unit has failed and the fix is a new IGU, not a new window. The frame is usually still good. We replace the glass unit with a new Low-E, argon-filled IGU that matches your ES window’s original specs or improves on them. Most IGU replacements run $550-$1,100 per sash in Palm Beach, and you’ll get a free estimate before you commit. Call (561) 782-7525 and we’ll take a look.
We’re an independent ES Windows service provider, which means we don’t file claims on your behalf against ES Windows’s manufacturer warranty. What we do is fix the window correctly using either OEM parts (which preserve the warranty where it still applies) or a high-quality aftermarket IGU we stand behind ourselves. If you have an active warranty, we’ll tell you how to use it and give you a quote for our repair if the warranty won’t cover the labor. Every repair we perform is covered by our Done Right Promise.
Yes. If your frame is still solid and it’s the glass that’s underperforming, we can replace the old IGU with a new unit that uses a higher-performance Low-E coating, argon gas fill, and, where you need it, laminated impact glass. This is one of the most cost-effective ways to improve energy efficiency on a Palm Beach home with ES windows that are otherwise in good shape. We’ll give you a quote for both OEM and high-performance aftermarket glass so you can make the call.
Most ES Windows repairs can be diagnosed within one business day and completed within that same visit if the parts are on hand. IGU replacements usually take 3-7 days from approval because the glass unit is custom-fabricated to your window’s exact size. We’ll give you a clear timeline when you call, and someone will actually answer the phone when you do. Call (561) 782-7525 any hour.
No. We quote a fixed, line-item price before any work begins, and that’s the number on the invoice when we leave. If we open the window and find something unexpected, we stop, show you what we found, and give you a revised quote before touching it. We don’t bill for surprises. For seniors and veterans, there’s a permanent 10% discount. For any repair over $200, you’ll get $40 off. These offers don’t expire, and they’re not gimmicks.
Call Winslow Windows & Doors at (561) 782-7525 for a free estimate on your ES Windows energy-efficient windows in Palm Beach. We’ll come out, diagnose the real problem, and give you a written quote you can hold us to. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.