Therma-Tru Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

Therma-Tru Shingle, Tile & Metal Roofing in Palm Beach: What to Know First

We provide independent Therma-Tru shingle, tile and metal roofing repair and installation in Palm Beach, with most repairs completed in a single visit once parts are in hand. Straight answer on price: a typical Therma-Tru roof repair in Palm Beach runs $350 to $1,600 depending on the roofing material and what’s actually failing, and you’ll get a written line-item quote before we start. This page is for Palm Beach homeowners who own Therma-Tru products and want someone who knows this brand’s roofing systems instead of a crew guessing at it. Call (561) 782-7525 and you’ll get a real person, any hour.

Call (561) 782-7525

How Therma-Tru Products Fail - and How We Fix Them

Not every Therma-Tru issue is obvious from the ground. After years working on Palm Beach homes, we know what hides under the surface with this brand’s roofing-adjacent products and how the salt air accelerates things. Here are the real failure patterns we see in the field:

• Shingle roof decking rot beneath Therma-Tru skylight curbs. Palm Beach humidity plus hurricane-driven rain finds the smallest gap where the skylight curb meets the shingle underlayment. We remove the affected shingles, replace the rotted decking section with marine-grade plywood, re-flash the curb with copper or lead-coated flashing, and re-lay matching shingles so the repair blends in.
• Tile roof cracks radiating from Therma-Tru chimney cap mounts. Barrel and flat concrete tile around chimney chase penetrations crack when thermal expansion meets a rigid mounting point. Palm Beach’s temperature swings between afternoon sun and evening ocean air make this worse. We pull the cracked tile, install an isolation membrane, and remount the cap with flexible flashing before setting new tile.
• Metal roof panel delamination at Therma-Tru vent stack intersections. Standing-seam and metal shingle roofs fail at vent penetrations because dissimilar metals and caulk age out in the coastal salt. We replace the boot with a lifetime silicone version, re-secure the seam, and eliminate the galvanic corrosion point.
• Therma-Tru wall flashing lifting on tile-to-wall transitions. Where the tile roof meets a stucco or siding wall, kickout flashing works loose after a few hurricane seasons. Water rides the wall straight into the eave. We cut a proper reglet into the wall, seat new step flashing, and rebuild the tile-to-wall line for a watertight bond.
• Failed underlayment beneath Therma-Tru-flashed dormers. Palm Beach homeowners with shingle roofs and dormer windows report slow ceiling stains. The truth is usually old underlayment that deteriorated years ago, with the flashing as the last line of defense. We strip the dormer roof section, lay new synthetic underlayment, and re-flash the Therma-Tru unit with ice-and-water shield in the valleys.

Every one of these is a job where guessing leads to a callback in six months. We fix the root cause the first trip.

Our Therma-Tru Shingle, Tile & Metal Roofing Process

From the first phone call to the final nail, here’s how a Therma-Tru roofing job goes with our crew:

1. 1
   Call and describe what you’re seeing. A live person answers, asks the right questions, and schedules the visit. No ticket numbers.
2. 2
   On-site diagnostic walk. Our tech inspects the Therma-Tru product, the roofing around it, and the transition points where failures actually happen. You get plain-English findings, not a sales pitch.
3. 3
   Parts decision. We pull the model number on the Therma-Tru unit and determine whether OEM or quality aftermarket parts make sense. If the roofing material needs matching, we check shingle, tile or metal panel availability in your exact profile.
4. 4
   The repair. We execute the fix using the process outlined above, including underlayment, flashing, and re-bedding where needed. Prep is meticulous – we protect the surrounding roof area and clean as we go.
5. 5
   Water test and walkthrough. We run water on the repair point, then walk the roof with you so you see the finished work and know what was replaced and why.
6. 6
   The Done Right Promise. It’s not a slogan on a brochure. If something’s not right with our work, we come back and fix it. Ed Winslow’s name is on the door – and on every job we do.

What Therma-Tru Shingle, Tile & Metal Roofing Costs in Palm Beach

Here’s what you’re realistically looking at for Therma-Tru roofing work in Palm Beach in 2025 dollars. These are honest ranges based on the jobs we’ve done, not national-average filler:

What moves the price: roof pitch and height (steep roofs cost more in labor), tile profile availability (older Palm Beach barrel tile can mean sourcing a custom match), and whether we’re pulling permits for a structural repair. You’ll get a fixed quote before any work begins, and the price we quote is the price you pay. Call (561) 782-7525 for your free estimate.

Why Palm Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work

We’ve been doing this in Palm Beach since 2011, and Ed Winslow grew up in El Cid – he’s watched salt air eat houses since before he could drive. That local knowledge means we know a Palm Beach tile roof needs different flashing than one in Boca. We’re the only company in the county with the Done Right Promise – if it’s not done right, we make it right. Full stop. Every tech is background-checked and uniformed, so you know exactly who’s on your roof. And because we install PGT, CGI, CWS, and ES Windows alongside Therma-Tru, we see the whole exterior as one sealed system – not isolated repairs that miss the real water path. My name’s on the truck. That’s the only guarantee you actually need. We answer the phone 24/7. We pull permits when the job requires, and we don’t play games with the estimate. The one down the road.

FAQs