Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Energy-Efficient Windows in Palm Beach: What to Know First
We service and install Therma-Tru energy-efficient windows throughout Palm Beach, and most jobs are finished within three to five business days once materials land. An independent Therma-Tru service provider, we handle Low-E glass upgrades, argon gas refills, insulated laminated glass replacement, and full ENERGY STAR window swaps at honest, upfront pricing. If you own a Therma-Tru window or door and your cooling bills are climbing, or you’re feeling heat radiate through the glass by mid-afternoon, call (561) 782-7525 and we’ll tell you straight what it will take to fix it.

How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru built its name on doors, but its window lines show up in plenty of Palm Beach homes, especially newer construction and remodel work. Salt air, humidity, and relentless UV do specific things to these units. Here’s what we see most often:
- Seal failure on Classic-Craft and Pulse series insulated glass. The desiccant strip inside the spacer eventually saturates in Palm Beach’s humidity. You’ll notice fog between the panes that won’t wipe off. We replace the insulated glass unit rather than the whole frame, which keeps the job under $400 in most cases and preserves the original trim work.
- Low-E coating degradation on south-facing units. Therma-Tru’s factory Low-E works, but after eight to ten years of direct Florida sun, the coating can start to haze. You’ll see a slight milky tint at certain angles. We swap in updated Low-E3 or comparable glass that matches the original sightline and bumps the SHGC down where it matters.
- Argon gas loss through worn glazing beads. On Therma-Tru sliding windows and hinged patio doors, the glazing bead can warp slightly with heat cycling. The gas escapes, the insulation value drops, and you’d never know from looking at it. We test with a thermal meter, then re-glaze and refill with argon or krypton, whichever the original spec called for.
- Frame-to-glass thermal bridging on older Slim-Line profiles. The original Slim-Line frames were narrower, which looks good but leaves less room for thermal breaks. In summer, the aluminum edge transfers heat straight through. We can retrofit with insulated laminated glass and upgraded weatherstripping that cuts that transfer, or replace the sash if the frame’s still square.
- UV fade damage around fixed transoms and sidelites. Therma-Tru transom windows sit high and catch full sun. The factory glass blocks some UV, but not enough to protect hardwood floors and upholstered furniture near west-facing entries. We install UV-blocking laminated glass rated to block 99% of UV rays, same thickness as the original, so the visual match is identical.
Therma-Tru’s own documentation won’t tell you most of this. We know it because we’ve pulled apart several hundred of these units in Palm Beach heat and humidity since 2011.
Our Therma-Tru Energy-Efficient Windows Process
Here’s how a typical job goes from your first call to the final walk-through:
- 1
You call (561) 782-7525. A live person answers. No voicemail tree. We schedule a time that works for you, and there’s no trip charge if you’re in our home county.
- 2
We inspect every Therma-Tru unit. Not just the one that’s fogging. We check glass condition, seal integrity, gas retention, weatherstripping, and frame alignment, then show you exactly what we found.
- 3
We price the fix in writing before any work starts. Fixed numbers, line by line. You approve exactly what we do. No change orders later.
- 4
We source the right parts. For glass, we use OEM-spec insulated units or quality aftermarket equivalents that match Therma-Tru’s original thermal performance. We’ll tell you which is which and why we recommend it. Warranty-safe practices on every job, so your original Therma-Tru coverage stays intact where it applies.
- 5
We do the work, test, and clean up. After installation, we check each unit with a thermal meter to confirm the insulation value matches what we quoted. Then we haul off the old sashes, glass, and any packaging.
- 6
You get our Done Right Promise. If it’s not done right, we come back and make it right. Ed Winslow’s name is on the business, and that promise means something on every job we leave.
What Therma-Tru Energy-Efficient Windows Costs in Palm Beach
Here are real numbers for the jobs we do most in Palm Beach:
- Fogged glass replacement on a single Therma-Tru insulated window: $180-$340, depending on size and glass type.
- Argon gas refill with re-glazing on one window: $120-$220.
- Low-E or UV-blocking glass upgrade on a small fixed transom: $190-$310.
- Full sash replacement with ENERGY STAR-rated glass on a Therma-Tru sliding window: $450-$800.
- Whole-home window energy audit (up to 15 units): $150-$250, credited toward any repair you approve that day.
What moves the price: glass size, whether it’s tempered, whether the frame is square enough to hold a new sash, and whether you need OEM glass or can go with an equivalent aftermarket unit. We’ll tell you the difference and let you decide. Call (561) 782-7525 for an exact quote. Estimates are free, and so are second opinions on any written estimate you’ve gotten elsewhere.

Why Palm Beach Homeowners Call Winslow Windows & Doors for Therma-Tru Work
We’ve been doing this in Palm Beach since 2011, and Ed Winslow grew up in El Cid, so he knows exactly what salt air and hurricane seasons do to window glass over time. That matters when you’re deciding whether to repair or replace a Therma-Tru unit. We’re an authorized installer for eight brands, so if a Therma-Tru window isn’t worth saving, we can show you PGT, CGI, CWS, or ES Windows alternatives and give you an honest comparison, not a sales pitch. Every technician who shows up at your door is background-checked and in uniform, so you know who you’re letting in. And the Done Right Promise isn’t a warranty card in a drawer. It’s Ed’s word, and Ed’s name is on the truck. That’s the only guarantee you actually need.
FAQs
In most cases, yes. We follow OEM-spec procedures for glass replacement, glazing, and weatherstripping, and we document everything. If any part of your Therma-Tru warranty might be affected by a specific repair approach, we’ll tell you before we start so you can make an informed call. Call (561) 782-7525 and we’ll walk through your specific window’s coverage.
Most standard insulated glass units arrive in three to five business days. Custom sizes, odd-shaped transoms, or specialty Low-E formulas can take up to two weeks. We’ll give you a firm timeline when we quote the job, not an estimate that stretches into a month.
If the frame is square, the hardware works, and the issue is glass, seals, or gas retention, repair almost always makes more sense. A full replacement costs two to three times as much and you lose the original fit and finish. If the frame is warped or the sash tracks are shot, then replacement is the honest answer. We’ll tell you which applies to your windows and show you the numbers either way. Call (561) 782-7525 for a free assessment.
Yes. Therma-Tru offers ENERGY STAR-rated window options with Low-E coatings and argon gas fills that meet the Southern climate zone standards, which matter for cooling-heavy homes in Palm Beach. The key spec to look for is a low SHGC (Solar Heat Gain Coefficient) below 0.25, which blocks the heat without making the room dark. We test every unit we install to confirm the rating matches the label.
We do, and they’re permanent, not promotions. Seniors and veterans get 10% off every job. Any repair over $200 takes $40 off. And if you’ve got a written estimate from another company, bring it in and we’ll give you a free second opinion. No expiration dates, no fine print. Call (561) 782-7525 and mention which applies to you.
If your Therma-Tru windows are fogging, leaking air, or turning your living room into a solar oven, call us at (561) 782-7525. We’ll send someone who actually knows Therma-Tru products, quote you a real number, and stand behind the work for as long as you own your home. That’s how we’ve done it in Palm Beach since 2011. We’re the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Palm Beach and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After