ES Windows Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

ES Windows Shingle, Tile & Metal Roofing in Palm Beach: What to Know First

Independent ES Windows shingle, tile & metal roofing in Palm Beach means we repair and install roof systems that work with ES Windows frames, flashing, and structural tie-ins without voiding your warranty or cutting corners on the waterproofing. Most ES Windows roof integrations in Palm Beach take one to two days once we’re on site, and we give you a written line-item price before any work starts, so you’ll never get a surprise on the invoice. If you own a Palm Beach home with ES Windows and your roof is leaking, lifting, or showing rust at the seam, call (561) 782-7525 and Ed Winslow will talk you through what you’re looking at.

Call (561) 782-7525

This page is for homeowners in Palm Beach and the surrounding area who bought ES Windows products and now need shingle, tile, or metal roofing work done correctly around them. You’ll find the failure modes we see most, what repairs actually cost here, and what we do differently.

Key Takeaways

• We’re an independent ES Windows service provider, not manufacturer-affiliated, which means we make repair decisions based on what’s best for your home, not a corporate script.
• Palm Beach salt air, afternoon storms, and draining issues around roof penetrations are the big three causes of ES Windows roof-related failures we see.
• We install shingle, tile, and metal roofing that ties into ES Windows frames with proper flashing, sealant, and drainage so water stays outside where it belongs.
• Every job carries the Done Right Promise. If it’s not done right, we make it right, period.

How ES Windows Products Fail - and How We Fix Them

ES Windows are built well, but they’re not magic. The roof around them takes a beating in Palm Beach, and we’ve seen the same failure patterns enough times to know exactly what to look for. Here are the five most common ones we fix on shingle, tile, and metal roof jobs.

• Flashing separation at the window head on ES Windows Series 3000 units. The factory flashing works fine when installed perfectly, but Palm Beach’s afternoon downpours and wind-driven rain can work water behind the flashing over time. The telltale sign is water staining on the interior wall directly below the window after heavy rain, not the window itself leaking. We pull the old flashing, inspect the rough opening, and re-flash with a two-stage system that drains water back out over the shingle or tile instead of trapping it inside.
• Roof-to-window transition leaks on tile roofs with ES Windows fixed picture windows. Tile roofs shed water fast, and when the tile-to-window transition isn’t stepped properly, water sheets over the window frame and finds the smallest gap. This one shows up as efflorescence, that white chalky residue, on the window frame corners. We re-cut the tile transition, install a copper or aluminum step flashing, and seal with a polyurethane that stays flexible through Palm Beach’s heat and humidity cycles.
• Metal roof oil canning and sealant failure around ES Windows casement windows near the roofline. Metal roof panels expand and contract a lot in direct Palm Beach sun. If the sealant joints at window penetrations are rigid, they crack. You’ll see little spider cracks in the sealant and hear popping sounds from the roof on hot afternoons. We use a high-movement sealant rated for metal roof applications and re-secure the panel edge so the window isn’t fighting the roof’s natural movement.
• Clogged weepholes on ES Windows sliding doors at patio roof transitions. This one’s sneaky because the leak doesn’t show up at the door. Water backs up behind the track, rots the subfloor and the shingle edge, then migrates inside. In Palm Beach, pollen, sand, and wind-blown debris gum up weepholes fast. We clear the drainage path, check the shingle overhang at the door, and often add a small diverter so water doesn’t pond at the track.
• Improper shingle step at ES Windows low-profile fixed windows on mansard roofs. Mansard roofs are steep, and when shingle installers cut corners on the step flashing below these windows, wind-driven rain walks right up under the shingle course. The symptom is a wet sill from below, not from above. We strip back the affected courses, re-step the flashing at the correct angle, and re-shingle with proper overlap so water always hits flashing, never the seam.

Our ES Windows Shingle, Tile & Metal Roofing Process

Here’s exactly how a ES Windows roofing job goes with us, from the first call to the final walkthrough.

1. 1
   You call (561) 782-7525. A live person answers. You describe the leak, the rust, the lifted shingle, whatever you’re seeing. Ed Winslow or one of our senior techs asks specific questions about your ES Windows units so we know what we’re rolling up to.
2. 2
   We inspect the roof and window interface. We don’t just look at the leak. We walk the roof, check the flashings, check the drainage, check the sealant joints at every ES Windows penetration. You get a written diagnosis with photos and plain-English explanation.
3. 3
   We price it line by line. OEM parts where they matter for warranty and fit. Quality aftermarket sealants, flashings, and fasteners where they perform as well or better. You’ll see exactly what each line item costs before we touch anything.
4. 4
   We do the work. Shingle, tile, or metal, the process is the same discipline, protect the window, strip and re-flash properly, install roofing materials to manufacturer spec, and keep the site clean. Our techs are background-checked and uniformed, and Ed’s name is on the truck. That’s the only guarantee you actually need.
5. 5
   We test the repair. Water test at the window-to-roof interface, visual inspection of every seam and flashing, and we walk you through what we did and why.
6. 6
   You get the Done Right Promise in writing. If it’s not done right, we make it right. Simple as that.

What ES Windows Shingle, Tile & Metal Roofing Costs in Palm Beach

Here are honest numbers for the ES Windows roofing scenarios we handle most in Palm Beach. Every job gets a written line-item quote before work starts, no change orders, no surprises.

• Flashing replacement at a single ES Windows unit on a shingle roof: $285-$540, depending on access and whether we’re re-stepping one or both sides of the window.
• Tile-to-window transition re-flash on one window: $410-$760, includes removing and resetting tile properly, new step flashing, and flexible sealant.
• Metal roof penetration re-seal around one ES Windows window or door: $340-$620, includes cleaning the existing sealant, prepping the joint, and re-sealing with high-movement polyurethane.
• Full roof-to-window interface repair on multiple units: $1,200-$3,500, depending on how many windows, the roof type, and how far gone the existing flashing is.
• Complete roof replacement with ES Windows interface work: $14,000-$38,000 in Palm Beach, depending on roof size, material, and how much interface work the windows need.

What moves the price: roof height and pitch, how many ES Windows units tie into the roofline, whether we’re repairing or replacing roofing material, and whether access requires special equipment. Call (561) 782-7525 for a free estimate, we’ll give you the real number, not a guess.

Why Palm Beach Homeowners Call Winslow Windows & Doors for ES Windows Work

We’ve been in business since 2011, locally owned by Ed Winslow, with a published address and license number. Ed grew up in El Cid, the historic Palm Beach neighborhood west of the Intracoastal, and he’s watched salt air and hurricane seasons eat homes alive for decades. That’s why we do what we do, and why we don’t cut corners on roof-to-window interfaces. The Done Right Promise means if our work isn’t right, we come back and make it right. You get a live person on the phone 24/7, background-checked and uniformed techs at your door, and upfront pricing with no change orders. We’re also authorized installers for PGT, CGI, CWS, ECO Window Systems, and other elite brands, so if your ES Windows unit needs a taller fix than a roof repair, we can talk you through the options without selling you something you don’t need. We’re the one down the road, not a ticket number.

FAQs