Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterAwning & Hopper Windows in Palm Beach, FL
Window Installation for awning and hopper styles is ideal for Palm Beach homes – they open on a hinge rather than sliding, which means they seal tighter, ventilate better, and hold up longer against wind-driven rain. If your current windows fog up during humidity spikes, let in salt air around the frame, or simply don’t meet Florida Building Code impact standards, an awning or hopper replacement is likely the fix you’re looking for. Call us at (561) 782-7525 – a live person answers every call, day or night.
At Winslow Windows & Doors, Ed Winslow has been installing these windows in Palm Beach homes since 2011. We’re locally owned, we carry a published address and state license number, and we work with brands like PGT and ViewLux that are purpose-built for South Florida’s coastal climate. If you want to understand the full scope of what we do before committing to anything, our Window Installation in Palm Beach page is the right place to start.
Awning windows hinge at the top and swing outward – they stay open (and ventilating) even during a light rain because the sash acts as its own canopy. Hopper windows are the inverse: they hinge at the bottom and tilt inward, making them ideal for tight spaces like bathrooms, basements, or the transom position above a door. Both styles give you a compression seal that standard sliding windows can’t match, which matters a great deal when you’re twelve blocks from the Atlantic and salt air finds every gap it can.
When You Need Awning or Hopper Windows
- Your current windows fail the “light test.” Hold a flashlight along the frame edge at night. If you see light bleeding through the perimeter, the compression seal is gone. In Palm Beach’s humidity, that gap is also letting in conditioned air – and you’re paying for it every month on your FPL bill.
- You want ventilation without worrying about rain. Palm Beach gets sudden afternoon squalls from May through October. Awning windows can stay cracked open during those storms without letting water inside, which is something a double-hung or slider simply can’t do safely.
- A bathroom or laundry room window is too small for anything else. Hopper windows are the standard choice for high, narrow openings where you need airflow but not visibility. We see this constantly in older Palm Beach homes built in the 1960s and 1970s where the bathroom window was an afterthought.
- Your windows don’t meet current Florida Building Code impact requirements. If your home still has single-pane or non-impact windows and you’re in a wind-borne debris region – which most of Palm Beach is – you may face permitting or insurance complications. PGT both offer impact-rated awning and hopper units that satisfy Miami-Dade NOA requirements.
- Condensation forms on the glass interior. In Palm Beach, interior condensation usually means the insulated glass unit (IGU) has failed and the inert gas fill has escaped. A fogged IGU isn’t going to clear up on its own; the glass needs replacing, and in most cases it makes more sense to put that money toward a properly rated replacement window.
- Your home is mid-renovation and you’re blocking out a new opening. Awning and hopper configurations work well as accent windows alongside larger picture or casement units. If you’re doing a broader remodel in Palm Beach Shores or El Cid, this is the moment to standardize the whole opening to impact-rated glass rather than patchwork later.
Our Awning & Hopper Window Process
We don’t show up with a truck full of generic inventory and hope something fits. Every job starts with a real measurement and ends with Ed Winslow’s name on the warranty – because of our Done Right Promise, if it’s not done right, we come back and make it right. Here’s exactly what the process looks like from first call to final inspection.
-
Free On-Site Measurement and Assessment
We schedule a visit at your Palm Beach address, measure each opening precisely, and assess the rough framing condition. Old stucco homes near the Intracoastal sometimes have water-damaged bucks or sill plates that need addressing before a new window goes in – we’d rather find that now than after the window is ordered. There’s no trip charge for homes in our home county, and the estimate is upfront: you’ll know the number before we leave. -
Product Selection and Special Order
We walk you through your options in PGT or ViewLux awning and hopper configurations – frame color, glass package (impact laminate, Low-E coating, argon fill), and screen type. Because these windows are made to order for your exact rough opening, lead times typically run two to four weeks depending on the brand and current factory schedule. We give you a realistic date, not a hopeful one. -
Permit Pulling
Palm Beach County requires a building permit for window replacement when the work involves structural changes or a change in window type. We handle the permit application, submit the NOA documentation, and schedule the required inspections – you don’t chase paperwork. Some homeowners are surprised this step exists; others have been burned by contractors who skipped it. We don’t skip it. -
Day-of Installation
Our background-checked, uniformed crew arrives within the confirmed window. Old windows come out, the rough opening is inspected and flashed per Florida Building Code, and the new awning or hopper unit goes in with proper sealant at every joint. For impact windows, we torque the fasteners to spec and verify the frame isn’t racked before the crew leaves. Cleanup is part of the job. -
Final Inspection and Sign-Off
We schedule the county inspection and walk you through the completed installation before we consider the job done. You’ll see us open and close each window, check the locking hardware, and confirm the drainage weeps are clear. If anything isn’t right at final inspection, we address it that day – not next week. -
Done Right Promise
After sign-off, our accountability doesn’t evaporate. The Done Right Promise means that if a problem with our installation surfaces down the road, Ed’s name is on it and we come back to fix it. No runaround, no “that’s a manufacturer issue” deflection unless it genuinely is – and even then, we help you navigate the manufacturer claim.
Awning & Hopper Windows Pricing in Palm Beach
In Palm Beach, awning and hopper window replacement typically runs between $550 and $1,800 per window installed, depending on size, glass package, frame material, and whether the rough opening needs any prep work. That range is wider than some contractors advertise because the honest answer is that a small hopper window in a bathroom is a very different job from a wide awning unit in a kitchen with a rotten sill plate underneath it – and unlike Bay & Bow Windows, these compact styles fit tighter spaces.
| Scenario | Estimated Installed Cost (Per Window) |
|---|---|
| Small hopper (bathroom/utility), standard impact glass | $550 – $800 |
| Mid-size awning window, impact laminate + Low-E coating | $750 – $1,100 |
| Larger awning window (36″+ wide), premium frame color, argon fill | $1,000 – $1,400 |
| Any window with sill/buck repair or opening modification | Add $150 – $400 to above ranges |
| Permit (Palm Beach County, typical residential) | $75 – $200 depending on valuation |
A few things that move the number in Palm Beach specifically:
- Coastal exposure rating. Homes east of US-1, particularly in areas like Palm Beach Island and Midtown Palm Beach, are in higher wind-speed zones. The glass package required for NOA compliance in those zones costs more – but it’s not optional if you want your insurance to stay whole after a storm.
- Frame material. Vinyl frames are the most common choice for coastal humidity resistance. Aluminum frames with thermal breaks cost more but are preferred by some homeowners in historic Palm Beach properties where the profile matters visually.
- Multi-window jobs. If you’re replacing several windows at once – which many Palm Beach homeowners do when a renovation is underway – the per-unit cost generally comes down because the trip, permit, and labor setup are spread across more openings.
- Existing condition of the rough opening. Older CBS (concrete block stucco) homes in Palm Beach sometimes have window bucks set in mortar that need chipping and patching before a new frame can go in properly. We quote this honestly after the on-site visit.
Seniors and veterans receive a permanent 10% discount on all work – no expiration, no fine print. Any repair over $200 gets $40 off automatically. And if you’ve already received a written estimate from another contractor, we’ll give you a free second opinion so you know exactly what you’re comparing.
Call (561) 782-7525 for a free, no-obligation estimate. We’ll give you a real number based on your actual windows – not a range that doubles by the time the crew leaves.
FAQs – Awning & Hopper Windows in Palm Beach
What is the difference between an awning window and a hopper window?
An awning window hinges at the top and swings outward, while a hopper window hinges at the bottom and tilts inward toward the room. Both create a compression seal when closed that’s tighter than a sliding window, which is why they’re popular in Palm Beach homes where air sealing and impact resistance matter. Casement Windows share similar hinge designs, and like awnings they’re more common in living areas and kitchens where you want ventilation during rain; hoppers are the go-to for bathrooms, utility rooms, and narrow transom openings where inward-swinging makes more sense spatially. Call us at (561) 782-7525 if you’re not sure which configuration fits your opening – we’re happy to walk through it before you commit to anything.
Do awning and hopper windows need to be impact-rated in Palm Beach?
Yes, in most cases. Palm Beach is within a wind-borne debris region under Florida Building Code, which means replacement windows generally need to meet impact-resistance standards or be paired with a code-compliant storm shutter system. Most homeowners choose impact-rated glass because it satisfies the requirement permanently without the hassle of deploying shutters before every storm. PGT both make impact-rated awning and hopper units with current Miami-Dade NOA approvals. We pull the permits and handle the inspection so you know the installation is code-compliant from day one.
How long does it take to install awning or hopper windows in Palm Beach?
The installation itself – once the windows arrive – typically takes one to three hours per opening, depending on the size and condition of the rough framing, though Garden Windows and other specialty shapes can take longer. The longer part of the timeline is the order lead time, which currently runs two to four weeks for PGT units made to your exact specifications. Permit processing in Palm Beach County adds a few business days on the front end. Realistically, from the day you sign off on your quote to the day your new windows are inspected and done, plan for four to six weeks. We give you a realistic schedule at the estimate stage so you can plan around it.
Can I replace just one awning or hopper window, or do I need to do them all at once?
You can absolutely replace a single window – there’s no rule that says you have to do the whole house at once. That said, if several windows in your Palm Beach home are the same age and showing similar signs of wear, replacing them together usually saves money per unit because the permit, crew trip, and setup cost are shared. We’ll give you pricing both ways so you can make the call that makes sense for your budget. Either way, each window we install carries the same Done Right Promise, whether it’s one unit or twenty.
Why Palm Beach Homeowners Choose Winslow
Ed Winslow started this business in 2011 because he saw too many Palm Beach homeowners getting handed a ticket number by national chains and waiting weeks for a callback. Fourteen-plus years later, the business is still locally owned, still operated out of a published address with a real license number, and still picks up the phone at 2 a.m. if that’s when you need to call. No voicemail loop, no call center, no “someone will be in touch.”
Every technician who comes to your door is background-checked and arrives in uniform. You’ll know who’s coming before the truck pulls up. We work with PGT, CGI, and ViewLux, among others – eight authorized brands in total – so we’re not steering you toward whatever we happen to stock. We specify the product that’s right for your opening and your home’s exposure zone, order it, and install it correctly the first time.
And if something’s not right, we come back. That’s the Done Right Promise. Ed’s name is on the door and on every job we do – and that accountability doesn’t have an expiration date.
Winslow Windows & Doors is the kind of company you can read about on our home page and then call with confidence, knowing you’ll get a straight answer from someone who actually knows Palm Beach windows. We’re the one down the road – and we’d like to stay that way.
Key Takeaways
- Awning windows hinge at the top (swing out); hopper windows hinge at the bottom (tilt in). Both seal tighter than sliding windows.
- Most Palm Beach homes require impact-rated windows under Florida Building Code. PGT make NOA-approved awning and hopper units.
- Installed cost in Palm Beach typically runs $550 to $1,800 per window, depending on size, glass package, and opening condition.
- Winslow pulls the permit, handles the county inspection, and covers the installation under the Done Right Promise.
- Seniors and veterans receive a permanent 10% discount. Any repair over $200 gets $40 off. Free second opinions on written estimates.
- A live person answers every call at (561) 782-7525 – 24 hours a day, 7 days a week.
Ready for a free estimate on awning or hopper windows at your Palm Beach home? Call (561) 782-7525 now. A real person will answer, we’ll schedule your on-site measurement at a time that works for you, and you’ll have a firm, upfront price before we ever order a single window. No surprises on the invoice – that’s a promise.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.